Welina mai i kā mākou mau pūnaewele!
English
1
Hae (1)
Hae (3)
Hae (2)
Uea ʻEnameled Manganin 0.1mm, 0.2mm, 0.5mm Uea Alloy Pale Kiʻekiʻe Kiʻekiʻe Kiʻi i Hōʻike ʻia
  • Uea ʻEnameled Manganin 0.1mm, 0.2mm, 0.5mm Uea Alloy Palekana Kiʻekiʻe
  • Uea ʻEnameled Manganin 0.1mm, 0.2mm, 0.5mm Uea Alloy Palekana Kiʻekiʻe
  • Uea ʻEnameled Manganin 0.1mm, 0.2mm, 0.5mm Uea Alloy Palekana Kiʻekiʻe
  • Uea ʻEnameled Manganin 0.1mm, 0.2mm, 0.5mm Uea Alloy Palekana Kiʻekiʻe
  • Uea ʻEnameled Manganin 0.1mm, 0.2mm, 0.5mm Uea Alloy Palekana Kiʻekiʻe
  • Uea ʻEnameled Manganin 0.1mm, 0.2mm, 0.5mm Uea Alloy Palekana Kiʻekiʻe

Uea ʻEnameled Manganin 0.1mm, 0.2mm, 0.5mm Uea Alloy Palekana Kiʻekiʻe

Wehewehe Pōkole:

Nā ʻano koʻikoʻi
Nā ʻano kikoʻī o ka ʻoihana
Mea Alakaʻi
ʻO ke keleawe nikala
Mea Hoʻokaʻawale
PE
Helu o nā Alakaʻi


Nā kikoʻī huahana

Nā nīnau i nīnau pinepine ʻia

Nā Lepili Huahana

Wehewehe Huahana

Uea ʻEnameled Manganin (0.1mm, 0.2mm, 0.5mm) Uea Alloy Palekana Kiʻekiʻe

ʻIke Huahana

Manganīnauea enamelhe uea huila kūpaʻa kiʻekiʻe i haku ʻia me kahi kumu manganin (hui Cu-Mn-Ni) i uhi ʻia me kahi papa insulation enamel lahilahi a pale wela. Loaʻa i nā diameters 0.1mm, 0.2mm, a me 0.5mm, ua hana ʻia no nā noi e pono ai ke kūpaʻa uila paʻa ma luna o nā pae mahana ākea a me ka liʻiliʻi o ka pale ʻana. Hāʻawi ka uhi enamel i ka insulation uila maikaʻi loa a me ka pale mechanical, e kūpono ai no nā resistors precision, nā shunt current, a me nā mea hana kahi e koʻikoʻi ai ka pololei.

Nā Hoʻonohonoho Maʻamau

  • Kūlana Alloy: Kūlike me ASTM B193 (nā kikoʻī alloy manganin)
  • Hoʻopaʻa ʻEnamel: HālāwaiIEC 60317-30 (polyimide enamel no nā uea wela kiʻekiʻe)
  • Nā Kūlana Ana: Kūlike me GB/T 6108 (uea enamelnā hoʻomanawanui nui)

Nā Hiʻohiʻona Koʻikoʻi

  • Ke Kū'ē Paʻa Loa: Ka nui o ke kū'ē ʻana o ka mahana (TCR) ≤20 ppm/°C (-55°C a i 125°C)
  • Ka Holo ʻana o ke Kū'ē Haʻahaʻa: <0.01% ka loli kū'ē ma hope o 1000 mau hola ma 100°C
  • Hana Hoʻokaʻawale Kiʻekiʻe: Ka uila haki ʻana o ka Enamel ≥1500V (no ke anawaena 0.5mm)
  • Ka Mana Ana Pololei: Ke ahonui o ke anawaena ±0.002mm (0.1mm), ±0.003mm (0.2mm/0.5mm)
  • Ke Kū'ē Wela: Hiki i ka Enamel ke kū i ka hana mau ma 180°C (papa H insulation)

Nā Kikoʻī ʻenehana

ʻAno Anawaena 0.1mm Anawaena 0.2mm Anawaena 0.5mm
Anawaena inoa 0.1mm 0.2mm 0.5mm
Mānoanoa o ka Enamel 0.008-0.012mm 0.010-0.015mm 0.015-0.020mm
Anawaena holoʻokoʻa 0.116-0.124mm 0.220-0.230mm 0.530-0.540mm
Ke kū'ē ma 20°C 25.8-26.5 Ω/m 6.45-6.65 Ω/m 1.03-1.06 Ω/m
Ikaika Hoʻopaʻa ≥350 MPa ≥330 MPa ≥300 MPa
Hoʻolōʻihi ≥20% ≥25% ≥30%
Ke kū'ē ʻana i ka pale ʻana ≥10⁶ MΩ·km ≥10⁶ MΩ·km ≥10⁶ MΩ·km

Ka Hoʻohui Kemika (Manganin Core, Maʻamau%)

ʻElemene ʻIke (%)
Keleawe (Cu) 84-86
Manganese (Mn) 11-13
Nikala (Ni) 2-4
Hao (Fe) ≤0.3
Silika (Si) ≤0.2
Nā mea haumia āpau ≤0.5

Nā kikoʻī huahana

Mea Nā kikoʻī
Mea ʻEnamel Polyimide (papa H)
Waihoʻoluʻu ʻAmber kūlohelohe (loaʻa nā kala maʻamau)
Ka lōʻihi no kēlā me kēia Spool 500m (0.1mm), 300m (0.2mm), 100m (0.5mm)
Nā Ana o ka Spool 100mm ke anawaena (0.1mm/0.2mm), 150mm ke anawaena (0.5mm)
Ka hoʻopili ʻana Hoʻopaʻa ʻia i loko o nā ʻeke pale makū me nā desiccants
Nā Koho Maʻamau Nā ʻano enamel kūikawā (polyester, polyurethane), ʻokiʻoki i ka lōʻihi

Nā Hoʻohana Maʻamau

  • Nā shunt o ke au pololei i nā mika mana
  • Nā kū'ē maʻamau no nā lako hoʻoponopono
  • Nā anakahi hoʻoluhi a me nā mea ʻike kaomi
  • Nā alahaka Wheatstone pololei kiʻekiʻe
  • Nā mea hana aerospace a me nā mea kaua

 

Hāʻawi mākou i ka hiki ke hahai piha ʻia no ka haku mele ʻana o nā mea a me ka hana kū'ē. Loaʻa nā laʻana manuahi (1m ka lōʻihi) a me nā hōʻike hoʻāʻo kikoʻī (me nā piʻo TCR) ma ke noi. Hoʻokomo pū ʻia nā kauoha nui me ke kākoʻo wili aunoa no nā laina hana resistor.
  • Ma mua:
  • Aʻe:
    • E kākau i kāu leka ma aneʻi a hoʻouna mai iā mākou

    Nā māhele huahana

    E kaomi iā enter e huli a i ʻole ESC e pani